Tools needed:

  • Phillips-head screwdriver
  • eK Level Sensor installing package
    • 1 x Mounting bracket (L-shaped)
    • 1 x Mounting bracket (U-shaped)
    • 3 x Screws
    • 1 x Plastic bolt


  • Step 1

    Route the cable of the eK Level Sensor through the larger hole of the L-shaped bracket.

  • Step 2

    Secure the L-shaped bracket to the eK Level Sensor using one screw.

  • Step 3

    Use two screws to secure the L-shaped mounting bracket to the U-shaped mounting plate. The U-shaped mounting plate can be positioned horizontally or vertically, depending on your specific aquarium setup.

  • Step 4

    Place the plastic bolt into the corresponding hole on the U-shaped mounting plate. Do not tighten it yet.

  • Step 5

    Position the eK Level Sensor on your aquarium in your desired location, and turn the plastic bolt until the sensor is securely fastened.

  • Step 6

    Make sure that the eK Level Sensor stands parallel to and between 15 and 40 cm from the water.